Connect with us

Uncategorized

PXE-E53: No Boot Filename Received – How To Fix It

Published

on

PXE-E53: No boot filename received is a error that can occur when trying to boot up a computer. This error is usually caused by a problem with the computer’s BIOS or bootloader configuration. In this article, we’ll show you how to fix this error so you can get your computer up and running again.

What is PXE-E53?

If you’re getting the PXE-E53 error when trying to boot up your computer, it means that the Preboot Execution Environment (PXE) is unable to find a valid boot file. This can be due to a number of reasons, including a corrupted or missing boot file, a misconfigured PXE server, or a problem with the network connection.

There are a few things you can try to fix this problem:

1. Check the Boot File

The first thing to do is check that the boot file you’re using is valid and not corrupt. If you’re not sure what boot file to use, check with your computer’s manufacturer or the PXE server administrator.

2. Reconfigure the PXE Server

If the boot file is valid, then the next step is to reconfigure the PXE server. This process will vary depending on which PXE server software you’re using, so consult your server’s documentation for instructions.

3. Verify Network Connection Settings

Finally, make sure that all of your computer’s network connection settings are correct. This includes the IP address, subnet mask, gateway, and DNS servers. If any of these are incorrect, it could cause the PXE-E53 error.

How to Fix PXE-E53

If your computer is displaying the PXE-E53 error, it means that it is unable to connect to a DHCP server in order to obtain an IP address and boot from a network location. This can be caused by a number of factors, including:

-A faulty or incorrect network cable

-An incorrect DHCP server configuration

-A problem with the DHCP server itself

To fix this issue, you will need to check each of these potential causes and rule them out one by one.

Start by checking your network cable. If it is loose or damaged, replace it with a new one. If that doesn’t fix the problem, move on to checking the DHCP server configuration. Make sure that the server is properly configured and that it is able to hand out IP addresses. If there are still no joy, try restarting the DHCP server itself.

What Causes PXE-E53?

When booting up a computer, the Basic Input/Output System (BIOS) starts looking for an Operating System on various devices and storage media. One of the devices it checks is the network interface card (NIC). If the BIOS finds a valid system image on the NIC, it will start loading that image.

The Preboot Execution Environment (PXE) is a protocol that allows a NIC to request an Operating System image from a server on the network. The PXE-E53 error message occurs when the BIOS is unable to find a valid system image on the NIC.

There are several possible causes for this error:

The PXE server may be configured incorrectly.

The network cable may be disconnected or loose.

The NIC may be disabled in the BIOS.

The BIOS may be configured to boot from another device first.

Introduction

If you’ve ever received the error message PXE-E53: No boot filename received, then you know how frustrating it can be. This error can occur for a number of reasons, but fortunately, it’s usually easy to fix. In this blog post, we’ll explore some of the common causes of the PXE-E53 error and how to fix them. We’ll also provide some general troubleshooting tips that can help you resolve this error (and other PXE errors) on your own. ###

Conclusion

If you’re seeing the error message “PXE-E53: No boot filename received”, it means that your computer is trying to boot from a network location but is unable to find the necessary files. There are a few potential fixes for this problem, so be sure to try all of them before giving up. With a little patience and some troubleshooting, you should be able to get your computer back up and running in no time

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2017 Zox News Theme. Theme by MVP Themes, powered by WordPress.